The article presents the results of determining the longitudinal dynamic load of a container of standard size 1CC with sandwich panel walls. A mathematical model was developed that takes into account the longitudinal ...

This work deals with the possibilities of applying the MAG-CMT welding method for the purpose of wire arc additive manufacturing (WAAM). The WAAM method was operated using an industrial robot and welding device for MAG ...

The aim of this paper was to analyze the impact of varying zirconium additions (0.05; 0.10; 0.15 and 0.20 wt. % Zr) on corrosion behavior of the AlSi5Cu2Mg aluminum alloy. Potentiodynamic polarization corrosion tests ...

The mathematical model of a hinged-rear bus with a system of turning a hook-and-loop section for a dynamic way of turning is broken down. For the developed model, indicators of manoeuvrability and stability of the bus ...

The aim of the presented paper was to carry out a review of the internal structure of alloys used for high pressure die casting (HPDC) and to experimentally perform a structural analysis of AlSi9Cu3(Fe) alloy. Several castings ...

A paper was prepared related to current design engineering advancements. Topological optimization and generative design were some of these advancements. The process of topology optimization was explained in the following ...

Gear transmission can consist of gear wheels that are made of different materials and technologies. The manufacturing process of gear wheels depends mainly on the required properties and the choice of material. Less ...

This paper deals with flight control and stability surfaces, which is a comprehensive overview of control and stability surfaces of an aeroplane, especially three main control surfaces elevator, ailerons and rudder. These ...

The paper describes the issue of closing pipe ends in a pressing tool specially designed for this work. Theoretical relations from the theory of forming form the necessary basis for the subsequent design of the tool. ...

An oxide layer is formed on the surface of a molten aluminium alloy when it is exposed to the surrounding atmosphere. The oxide layer on the surface of the melt is not harmful. The problem occurs when it is entrained ...