Browsing Univerzitná knižnica - Vedecké odborné časopisy by Author "Moravec, Ján"

Now showing items 1-11 of 11

    • Aplikácia solenoidu pri magnetickom tvárnení 

      Moravec, Ján (University of Žilina, 2024)
      In the contribution, the theoretical part points out the known starting points for calculating the inductance of a long cylindrical coil. In the practical part, the method of application of magnetic forming in the production ...

    • Klinové zváranie rúrok 

      Moravec, Ján (University of Žilina, 2024)
      The article points out the possibilities offered by wedge welding, that is, one that does not require classic additional material and the creation of a welded joint. two significant methods of joining pipes are pointed out ...

    • Konštrukčná úprava strižných hrán 

      Moravec, Ján (University of Žilina, 2024)
      The contribution is devoted to geometrical questions related to the issue of adjusting the active parts of the cutting tool. There are three modifications of the cutters: With the blade beveled inward and bevelled outward, ...

    • Magnetic forming with heat in a magnetic field 

      Moravec, Ján (University of Žilina, 2024)
      The article focuses on the application of a magnetic field in the forming of low-carbon steel castings. The original solution of the forming device, which was used in the experimental works, is presented. The results of ...

    • Opotrebovanie strižníkov v strihacom nástroji 

      Moravec, Ján (University of Žilina, 2023)
      The paper describes the issue of wear of shears in shearing tools. It is pointed out to theoretical knowledge from the issue and also in experimental, or the practical part contains specific knowledge about the wear of the ...

    • Rovnanie plechu bodovým ohrevom 

      Moravec, Ján (Žilinská univerzita v Žiline, 2023)
      The contribution is devoted to the issue of material alignment. The theoretical description and essence of straightening by local heating is presented. Mechanical methods of leveling the material are also covered. In ...

    • Technológ 1/2022 

      Harušinec, Jozef; Suchánek, Andrej; Šťastniak, Pavol; Dižo, Ján; Blatnický, Miroslav; Kravchenko, Oleksandr; Gasper, Peter; Kantoríková, Elena; Moravec, Ján; Solčanský, Sebastián; Brezáni, Miloš; Matejka, Marek; Podprocká, Radka; Čaja, Alexander; Hrnková, Bronislava; Kapjor, Andrej; Vantúch, Martin; Melo, Borislav; Holešová, Natália; Lenhard, Richard; Klačko, Andrej; Zvada, Branislav; Holubčík, Michal; Kuľka, Jozef; Mantič, Martin; Maláková, Silvia; Nicolanská, Miriam; Sivák, Samuel; Harachová, Daniela; Nosek, Radovan; Šavrnoch, Zdenko; Širanec, Lukáš; Bolibruchová, Dana; Galčík, Marek; Brůna, Marek; Pastirčák, Richard; Jakubovičová, Lenka; Kopas, Peter; Novák, Pavol; Sága, Milan; Vaško, Miroslav; Handrik, Marián; Kolesnyk, Olha; Bubeník, Peter; Rakyta, Miroslav; Čapek, Juraj; Sýkorová, Martina; Biňasová, Vladimíra (Žilinská univerzita v Žiline, 2022)
      Štúdium mechanických vlastností strojných súčiastok s malou hustotou vnútornej výplne vyrobených metódou 3D tlače, 2. časť The article is focused on study of mechanical properties of machine components produced by the ...

    • Technológ 2/2022 

      Mičietová, Anna; Minárik, Peter; Čilliková, Mária; Neslušan, Miroslav; Čapek, Jiří; Sivák, Samuel; Maláková, Silvia; Harachová, Daniela; Kulya, Juliy Martyn; Tomáš, Miroslav; Evin, Emil; Kantoríková, Elena; Moravec, Ján; Galčík, Marek; Brůna, Marek; Širanec, Lukáš; Bolibruchová, Dana; Bronček, Jozef; Drbúl, Mário; Konstantová, Viera; Kožienka, Lukáš; Koňár, Radoslav; Šutka, Jozef; Blatnický, Miroslav; Dižo, Ján; Molnár, Denis; Bubeník, Peter; Kolesnyk, Olha; Rakyta, Miroslav; Čapek, Juraj; Frátrik, Martin; Mičian, Miloš; Trško, Libor; Hirjak, Rastislav; Mišaneková, Viera; Chudíková, Dáša; Šimko, Radomír; Piroško, Martin; Jaremko, Matúš; Uhrík, Radoslav; Melo, Borislav; Málek, Miroslav; Mičian, Miloš; Derďák, Ján; Sikora, Eduard; Baba, Marcel; Kotora, Miroslav; Kamenský, Rastislav; Pobočíková, Ivana; Guldan, Vladimír; Sedliačková, Zuzana; Chupáč, Radoslav; Кравченко, Александр Петрович; Кравченко, Екатерина Александровна; Дижо, Ян Янович; Блатницкий, Мирослав Янович (Žilinská univerzita v Žiline, 2022)
      Abstract: This paper deals with surface integrity after shot peening of AlSi 304 under variable conditions expressed in term of shot-peening cycles and corresponding Almen intensities. Surface state is investigated ...

    • Tvárnenie skla v jednoduchom tvárniacom nástroji 

      Moravec, Ján (Žilinská univerzita v Žiline, 2023)
      The contribution presents the analysis and issues of glass forming in a forming tool with external heating. The necessary theoretical knowledge and properties of glass, which are necessary for solving the design of the ...

    • Tvárnenie v hydraulickom prostredí explóziou 

      Moravec, Ján (University of Žilina, 2023)
      The article describes and analyses the issue of explosive sheet metal forming in a hydro environment. In the introductory part, the necessary theoretical and technological knowledge is presented, which is necessary as ...

    • Uzatváranie koncov rúr v tvarovej lisovnici 

      Moravec, Ján (University of Žilina, 2023)
      The paper describes the issue of closing pipe ends in a pressing tool specially designed for this work. Theoretical relations from the theory of forming form the necessary basis for the subsequent design of the tool. ...