Now showing items 41-60 of 468

    • Analýza výsledkov aplikácie koncepcie CPTED v zahraničí 

      Kubalová, Klaudia (University of Zilina, 2022)
      The process of designing security into architecture is known as "Crime Prevention Through Environmental Design." It includes a design built environment to reduce opportunities and fear of crime. Crime prevention through ...
    • Aplikačné možnosti HCCI technológie 

      Lavčák, Matúš; Puškár, Michal (University of Žilina, 2023)
      This text describes the current state of the art of HCCI technology, which is based on combining the characteristics of a petrol and diesel engine. HCCI engines offer higher fuel efficiency and lower nitrogen oxide emissions. ...
    • Aplikácia analytickej viacúrovňovej metódy pri výbere zatepľovacieho materiálu 

      Horváthová, Michaela; Makovická - Osvaldová, Linda (Žilinská univerzita v Žiline, 2020)
      The article deals with the selection of four types of insulation material based on the particular criteria. Specifically, it will be a matter of decision among facade insulation materials. We chose four species of the ...
    • APLIKÁCIA DIAGNOSTICKEJ METÓDY CRITICAL TO QUALITY V POŠTOVOM PODNIKU DHL EXPRESS 

      Možuchová, Lucia; Obermajerová, Denisa (Žilinská univerzita v Žiline, 2016)
      This paper focuses on the critical criteria to quality (CTQ) of DHL Express Slovakia services, which have to improve the quality of DHL services. Based on the primary research facts about the quality of Domestic service, ...
    • APLIKÁCIA DIAGNOSTICKEJ METÓDY FMEA V KURIÉRSKEJ SPOLOČNOSTI DPD 

      Gašperová, Lucia (Žilinská univerzita v Žiline, 2017)
      The contribution considers the quality diagnostic of the postal company Direct Parcel Distribution SK s.r.o. by applying FMEA method, which focuses on the analysis of failure and effect. Early detection of possible ...
    • Aplikácia nedeštruktívnych metód kontroly na zvarové spoje vyrobené z plastu 

      Koňár, Radoslav; Grünermelová, Lucia (University of Žilina, 2024)
      The article describes the possibilities of non-destructive testing of welds made of plastic materials. Both surface and volume methods of non-destructive testing can be used for plastic welds. Non-destructive testing of ...
    • Aplikácia solenoidu pri magnetickom tvárnení 

      Moravec, Ján (University of Žilina, 2024)
      In the contribution, the theoretical part points out the known starting points for calculating the inductance of a long cylindrical coil. In the practical part, the method of application of magnetic forming in the production ...
    • Aplikácie difúzie v strojárskej výrobe 

      Jaššo, Martin; Pastirčák, Richard (University of Žilina, 2023)
      This thesis aims to explain the nature of the diffusion process and the importance of this process in the field of engineering production. The thesis contains information on the principles and mechanisms by which diffusion ...
    • The Application of Automatic Identification Technologies by the Czech Post 

      Zeman, Daniel; Juránková, Petra; Švadlenka, Libor (University of Zilina, 2013)
      This article deals with the question of practical use of automatic identification technologies in postal sector, with special focus on using barcode technologies and radio frequency identification in Czech Post. After ...
    • An Appraisal of Intercity Commuting Pattern Using Railway Services in South-Western Nigeria 

      Raji, Bashiru Adisa; Dina, Adeolu; Solanke, Muse Olayiwola; Alli, Taiwo Kareem (University of Zilina, 2021)
      Tracking the influence of service improvements on passengers particularly is an important component of transport management. This study examined the characteristics of intercity travellers in the Economy Class Units (ECU) ...
    • An Assessment of Solid Waste Transportation in Ado-Odo/Ota Local Government Area, Ogun State, Nigeria 

      Ogunbiyi, Margaret Emem; Onifade, Morakinyo Kehinde; Afolabi, Oluwaseyi Joseph; Oroye, Olufemi Adebayo (University of Zilina, 2020)
      This paper examines solid waste transportation in Ado-Odo/Ota Local Government Area of Ogun State. Adequate transportation of solid waste is one of the major challenges of waste managers in Nigeria because of inherent ...
    • Automation of Handling Systems in the Container Terminals of Maritime Ports 

      Dávid, Andrej (University of Zilina, 2019)
      Automation of handling systems in the container terminals of maritime ports has become one of the most important changes that happened in maritime transport since the first voyage of a container vessel in 1956. Nowadays, ...
    • BARIÉRY PODNIKANIA V ELEKTRONICKOM OBCHODE (ČASŤ I) 

      Madleňáková, Lucia; Mišíková, Michaela; Madleňák, Radovan (Žilinská univerzita v Žiline, 2016)
      The main goal of this paper is to identify and to judge the dangerous aspects of starting a business in the area of electronic commerce. Subsequently in the last part there are suggested actions, based on the critical ...
    • BARIÉRY PODNIKANIA V ELEKTRONICKOM OBCHODE (ČASŤ II) 

      Madleňáková, Lucia; Mišíková, Michaela; Madleňák, Radovan (Žilinská univerzita v Žiline, 2016)
      The final goal of this paper is to propose measures to eliminate identified risks and barriers of starting a business in the area of electronic commerce. In the last part there are there are suggested actions, based on ...
    • Batérie druhej životnosti a systém správy batérií 

      Šuňal, Martin; Kopčan, Jaroslav; Benka, Denis; Kulhánek, Tomáš; Jandík, Jan (University of Žilina, 2023)
      As electromobility continues to advance, there is a growing production of batteries that will eventually require recycling. One potential recycling approach involves repurposing worn yet still operational batteries in ...
    • Benchmarkingové porovnávanie služieb elektronického bankovníctva ako ekologickej inovácie 

      Loučanová, Erika (University of Zilina, 2020)
      The aim of the paper is benchmarking by comparing selected electronic banking services of Slovak banks as a form of eco-innovation with a focus on innovation in this sector. We point out the differences between the ...
    • Benefits of Autonomously Driven Vehicles 

      Rievaj, Vladimír; Mokričková, Lenka; Synák, František (University of Zilina, 2016)
      The vehicles with high grades have the embedded systems which are essential for the operation of a vehicle with higher standard of safety. This way road transport can significantly closer to the safety of rail and air ...
    • Bezpečnosť a ochrana zdravia pri práci s ohľadom na štatistickú klasifikáciu ekonomických činností 

      Kubás, Jozef; Buganová, Katarína; Sventeková, Eva; Petrlová, Katarína; Cidlinová, Anna (University of Žilina, 2023)
      Occupational health and safety is responsible for creating conditions that eliminate the impact of hazardous and harmful factors of the work process or environment on employees. The employer is obliged to report work ...
    • Bezpečnosť príslušníkov obecných polícií 

      Šoltés, Viktor; Kubás, Jozef; Cidlinová, Anna; Štědrý, Roman (Žilinská univerzita v Žiline, 2020)
      In the context of the occupation of any profession, it is essential to emphasize the level of safety and health at work. Employees performing specific professions who are at increased risk of an accident at work also ...
    • Bezpečnosť účastníkov cestnej premávky a ich vplyv na vnímanie dopravnej situácie 

      Ballay, Michal; Macurová, Ľudmila; Kohút, Pavol; Rédl, Miroslav (University of Žilina, 2023)
      When analysing an accident scene, one of the significant tasks is to evaluate the driver's ability to perceive the traffic situation according to different aspects. Currently, there are various eye movement measurement ...