Prehliadanie Technológ podľa názvu

Zobrazujú sa záznamy 39-58 z 114

    • Konštrukčný návrh koľajového adaptéra pre ľahké nákladné vozidlo, typ oceľ-oceľ 

      Dižo, Ján; Fiačan, Jakub; Lovska, Alyona; Blatnický, Miroslav; Ishchuk, Vadym (University of Žilina, 2024)
      Transportation is a quite complex system for relocation of passengers and goods for longer of shorter distances. Nowadays, a combination of several types of transport is typical for the most countries. Land transport ...

    • Konštrukčný návrh mechanizmu skrutkového manipulátora turniketu sypkých materiálov 

      Molnár, Denis; Blatnický, Miroslav; Dižo, Ján; Ishchuk, Vadym (Žilinská univerzita v Žiline, 2023)
      The article is the next step in the ongoing research regarding the incorporation of the proposed bulk material turnstile assembly into an existing production line serving the food industry for bagging powdered milk. The ...

    • Konštrukčný návrh rámu korby pre jednonápravový príves za traktor 

      Dižo, Ján; Blatnický, Miroslav; Ishchuk, Vadym; Molnár, Denis; Kurtulík, Jakub (University of Žilina, 2023)
      This article is focused on the results of the research, which is intended to design of a single-axle tipping tractor trailer. The trailer consists of two main parts, a frame and a superstructure. Both parts of the trailer ...

    • Kovokeramické trecie materiály využívané v práškovej metalurgi 

      Kantoríková, Elena (University of Žilina, 2024)
      Metal-ceramic materials are produced from a mixture of metal and ceramic powders. These are primarily sintered carbides for cutting tools and friction materials for brake linings. Their use is important in cases where it ...

    • Lean management, lean principles, lean manufacturing 

      Litvaj, Ivan (University of Žilina, 2023)
      My article is focused on one main topic, the topic of lean management. I describe lean management in the article, in basic definitions, principles, and contexts. I do not deal in detail with individual elements and aspects ...

    • Magnetic forming with heat in a magnetic field 

      Moravec, Ján (University of Žilina, 2024)
      The article focuses on the application of a magnetic field in the forming of low-carbon steel castings. The original solution of the forming device, which was used in the experimental works, is presented. The results of ...

    • Manévrovateľnosť a stabilita pohybu kĺbového autobusu, systém HST 

      Sakhno, Volodymyr; Gerlici, Juraj; Kravchenko, Oleksandr; Poljakov, Viktor; Chovcha, Iryna; Dižo, Ján (University of Žilina, 2023)
      The mathematical model of a hinged-rear bus with a system of turning a hook-and-loop section for a dynamic way of turning is broken down. For the developed model, indicators of manoeuvrability and stability of the bus ...

    • Matematický model pohonnej sústavy koľajového vozidla 

      Dižo, Ján; Blatnický, Miroslav; Ishchuk, Vadym; Molnár, Denis; Solčanský, Sebastián (University of Žilina, 2023)
      The presented research is aimed at the derivation of a mathematical model of diesel-mechanical drivetrain of a rail vehicle. It is derived by means of the Lagrange’s equations of the second kind. The derived mathematical ...

    • Materiály práškovej metalurgie 

      Kantoríková, Elena (University of Žilina, 2024)
      Powder metallurgy is used in all branches of industrial production. the main advantage of powder metallurgy is the saving of metals (materials) and energy. the main direction of development is expected mainly in the ...

    • Materiály s vysokou teplotou tavenia využívané v práškovej metalurgii 

      Kantoríková, Elena (University of Žilina, 2024)
      Metals with a high melting point are frequently used materials in technical practice. Their fundamental advantage over other metal materials is their higher melting temperature, which exceeds the melting temperature of ...

    • Menič pre batériové úložisko využívajúce druhý život batérií 

      Turza, Stanislav; Liška, Martin; Lipták, Ondrej; Valenta, Pavel; Zich, Jan (University of Žilina, 2023)
      The global trend of electrification in automotive industry cause increasing the number of the batteries for the electric vehicles. The batteries that have reached the end of their primary life in electrical vehicle have a ...

    • A modern approach to ergonomics: the study of work and non-work activities of employees 

      Zuzik, Ján; Biňasová, Vladimíra; Furmannová, Beáta (University of Žilina, 2024)
      The purpose of the study is to determine how an employee's work and non-work activities are related. The relevance of after-work activities is covered in the introduction. The relationship between employees' work and ...

    • Možnosti využitia technológie termálneho vŕtania na účely spájania tenkostenných nerovnakých materiálov v automobilovom priemysle 

      Guzanová, Anna; Veligotskyi, Nikita; Draganovská, Dagmar (University of Žilina, 2024)
      The article deals with the study of the applicability of flowdrill technology for the formation of joints between thin metallic materials based on iron and aluminium alloy. This technology is primarily used to create holes ...

    • Návrh elektrického mechanizmu otáčania výložníka stĺpového žeriava pre manipuláciu s kalovými čerpadlami 

      Blatnický, Miroslav; Dižo, Ján; Molnár, Denis; Ishchuk, Vadym (Žilinská univerzita v Žiline, 2023)
      The article is a continuation of the issue of the technical solution of the hinge for handling sludge pumps in the Jaslovské Bohunice nuclear power plant. The main goal is the design of the electric jib rotating mechanism. ...

    • Návrh experimentálneho pracoviska pre testovanie a výskum činnosti batériového úložiska 

      Kolková, Zuzana; Matušov, Jozef; Zubo, Augustín; Stupka, Aleš; Jandík, Jan (University of Žilina, 2023)
      The comprehensive experimental facility for battery storage introduces an innovative approach to analysing and optimizing the performance of energy storage systems. Designed with consideration for energy flow and overall ...

    • Návrh koľajového adaptéra typu guma-koľajnica pre ľahké nákladné vozidlo 

      Dižo, Ján; Fiačan, Jakub; Blatnický, Miroslav; Lovska, Alyona; Ishchuk, Vadym (University of Žilina, 2024)
      The article is focused on design of a tyre-rail adapter to be mounted on a light road-rail vehicle. The novelty of the design consists in its possibility to change the wheelbase of the vehicle axles for different railway ...

    • Návrh programu pre automatické vyhodnotenie obrazu výtlačku zosnímaného CCD kamerou 

      Pijáková, Katarína; Štalmach, Ondrej; Sága, Milan; Vaško, Milan (University of Žilina, 2023)
      The aim is to create a program for the automatic evaluation of hardness from a series of images taken by a CCD camera. We will present the different functions of the proposed program. In the first step, we created an ...

    • Odvodenie matematického modelu hnacieho mechanizmu pre pohon prídavných zariadení dopravného prostriedku 

      Dižo, Ján; Ishchuk, Vadym; Lovska, Alyona; Blatnický, Miroslav; Molnár, Denis (University of Žilina, 2023)
      The article is focused on a derivation of a mathematical model of a drive mechanism of for a drive of an additional devices of a transport mean. Additional devices are inseparable part of lorries, buses as well as railway ...

    • Opotrebovanie strižníkov v strihacom nástroji 

      Moravec, Ján (University of Žilina, 2023)
      The paper describes the issue of wear of shears in shearing tools. It is pointed out to theoretical knowledge from the issue and also in experimental, or the practical part contains specific knowledge about the wear of the ...

    • Optimálny návrh výroby neštandardného ozubeného súkolesia 

      Maláková, Silvia; Sivák, Samuel (Žilinská univerzita v Žiline, 2023)
      Gears are among the most widely used transmission mechanisms, and the gear wheel has become a symbol of mechanical engineering. In operation, high demands are placed on the function of the gears. To achieve them, the ...