Technológ: Recent submissions

Now showing items 101-114 of 114

    • Výroba ozubených kolies pomocou 3D tlače 

      Maláková, Silvia; Kepeň Harachová, Daniela; Sivák, Samuel (University of Žilina, 2023)
      Gear transmission can consist of gear wheels that are made of different materials and technologies. The manufacturing process of gear wheels depends mainly on the required properties and the choice of material. Less ...

    • Конструктивные особенности современных горных велосипедов, часть 2. 

      Дижо, Ян; Блатницкий, Мирослав; Васильевич Ищук, Вадим; Молнар, Денис; Солчанский, Себастьян; Плайдичко, Борис (University of Žilina, 2023)
      Cycling and bicycles become still more and more popular. People transport themselves to the work, to the school, to shops and other by bicycles. Bicycles represent quite effective transport means regarding to production ...

    • Generatívny dizajn pri konštrukčnom návrhu tvarov telies čelných ozubených kolies 

      Sivák, Samuel; Maláková, Silvia; Kepeň Harachová, Daniela (2023)
      A paper was prepared related to current design engineering advancements. Topological optimization and generative design were some of these advancements. The process of topology optimization was explained in the following ...

    • Orgány riaditeľnosti a stability letúnov, 2. časť 

      Solčanský, Sebastián; Dižo, Ján; Blatnický, Miroslav; Ishchuk, Vadym (University of Žilina, 2023)
      This paper deals with flight control and stability surfaces, which is a comprehensive overview of control and stability surfaces of an aeroplane, especially three main control surfaces elevator, ailerons and rudder. These ...

    • Accompanying phenomena during casting of aluminium alloys 

      Galčík, Marek; Brůna, Marek; Medňanský, Martin (University of Žilina, 2023)
      An oxide layer is formed on the surface of a molten aluminium alloy when it is exposed to the surrounding atmosphere. The oxide layer on the surface of the melt is not harmful. The problem occurs when it is entrained ...

    • Lean management, lean principles, lean manufacturing 

      Litvaj, Ivan (University of Žilina, 2023)
      My article is focused on one main topic, the topic of lean management. I describe lean management in the article, in basic definitions, principles, and contexts. I do not deal in detail with individual elements and aspects ...

    • Štruktúra hliníkových zliatin pre vysokotlakové odlievanie 

      Medňanský, Martin; Brůna, Marek; Matejka, Marek (University of Žilina, 2023)
      The aim of the presented paper was to carry out a review of the internal structure of alloys used for high pressure die casting (HPDC) and to experimentally perform a structural analysis of AlSi9Cu3(Fe) alloy. Several castings ...

    • Using the cold metal transfer (CMT) method for wire arc additive manufacturing (WAAM) applications 

      Frátrik, Martin; Mičian, Miloš (University of Žilina, 2023)
      This work deals with the possibilities of applying the MAG-CMT welding method for the purpose of wire arc additive manufacturing (WAAM). The WAAM method was operated using an industrial robot and welding device for MAG ...

    • Analýza pozdĺžneho zaťaženia kontajnera so stenami vyrobenými zo sendvičových panelov 

      Vatulia, Glib; Gerlici, Juraj; Lovska, Alyona; Krasnokutskyi, Yevhen (University of Žilina, 2023)
      The article presents the results of determining the longitudinal dynamic load of a container of standard size 1CC with sandwich panel walls. A mathematical model was developed that takes into account the longitudinal ...

    • Corrosion behavior of the AlSi5Cu2Mg alloy with varying Zr addition 

      Širanec, Lukáš (University of Žilina, 2023)
      The aim of this paper was to analyze the impact of varying zirconium additions (0.05; 0.10; 0.15 and 0.20 wt. % Zr) on corrosion behavior of the AlSi5Cu2Mg aluminum alloy. Potentiodynamic polarization corrosion tests ...

    • Technológ 4/2022 

      Unknown author (University of Zilina, 2022)

    • Technológ 3/2022 

      Sýkorová, Martina; Bolibruchová, Dana; Bílik, Jozef; Sobota, Róbert; Šuba, Roland; Mojžiš, Milan; Litvaj, Ivan; Dižo, Ján; Blatnický, Miroslav; Ishchuk, Vadym; Molnár, Denis; Štaffenová, Katarína; Rakyta, Miroslav; Bubeník, Peter; Biňasová, Vladimíra; Kasajová, Marta; Tarbajovský, Pavol; Puškár, Michal; Абович Подригало, Михаил; Петрович Кравченко, Александр; Герлици, Юрай; Сергеевич Шеин, Виталий; Сергеевич Ткаченко, Александр; Александровна Кравченко, Екатерина; Kantoríková, Elena; Koňár, Radoslav; Matejka, Marek; Podprocká, Radka; Kostrzewski, Mariusz; Jerzy Nowak, Wojciech; Medňanský, Martin; Brůna, Marek (Žilinská univerzita v Žiline, 2022)
      Vplyv teploty precipitačného vytvrdzovania na vlastnosti zliatiny AlSi5Cu2Mg legovanej Zr || Seamless Tubes Manufacturing Processes Analysis || Decision-making process and knowledge management, knowledge management and ...

    • Technológ 2/2022 

      Mičietová, Anna; Minárik, Peter; Čilliková, Mária; Neslušan, Miroslav; Čapek, Jiří; Sivák, Samuel; Maláková, Silvia; Harachová, Daniela; Kulya, Juliy Martyn; Tomáš, Miroslav; Evin, Emil; Kantoríková, Elena; Moravec, Ján; Galčík, Marek; Brůna, Marek; Širanec, Lukáš; Bolibruchová, Dana; Bronček, Jozef; Drbúl, Mário; Konstantová, Viera; Kožienka, Lukáš; Koňár, Radoslav; Šutka, Jozef; Blatnický, Miroslav; Dižo, Ján; Molnár, Denis; Bubeník, Peter; Kolesnyk, Olha; Rakyta, Miroslav; Čapek, Juraj; Frátrik, Martin; Mičian, Miloš; Trško, Libor; Hirjak, Rastislav; Mišaneková, Viera; Chudíková, Dáša; Šimko, Radomír; Piroško, Martin; Jaremko, Matúš; Uhrík, Radoslav; Melo, Borislav; Málek, Miroslav; Mičian, Miloš; Derďák, Ján; Sikora, Eduard; Baba, Marcel; Kotora, Miroslav; Kamenský, Rastislav; Pobočíková, Ivana; Guldan, Vladimír; Sedliačková, Zuzana; Chupáč, Radoslav; Кравченко, Александр Петрович; Кравченко, Екатерина Александровна; Дижо, Ян Янович; Блатницкий, Мирослав Янович (Žilinská univerzita v Žiline, 2022)
      Abstract: This paper deals with surface integrity after shot peening of AlSi 304 under variable conditions expressed in term of shot-peening cycles and corresponding Almen intensities. Surface state is investigated ...

    • Technológ 1/2022 

      Harušinec, Jozef; Suchánek, Andrej; Šťastniak, Pavol; Dižo, Ján; Blatnický, Miroslav; Kravchenko, Oleksandr; Gasper, Peter; Kantoríková, Elena; Moravec, Ján; Solčanský, Sebastián; Brezáni, Miloš; Matejka, Marek; Podprocká, Radka; Čaja, Alexander; Hrnková, Bronislava; Kapjor, Andrej; Vantúch, Martin; Melo, Borislav; Holešová, Natália; Lenhard, Richard; Klačko, Andrej; Zvada, Branislav; Holubčík, Michal; Kuľka, Jozef; Mantič, Martin; Maláková, Silvia; Nicolanská, Miriam; Sivák, Samuel; Harachová, Daniela; Nosek, Radovan; Šavrnoch, Zdenko; Širanec, Lukáš; Bolibruchová, Dana; Galčík, Marek; Brůna, Marek; Pastirčák, Richard; Jakubovičová, Lenka; Kopas, Peter; Novák, Pavol; Sága, Milan; Vaško, Miroslav; Handrik, Marián; Kolesnyk, Olha; Bubeník, Peter; Rakyta, Miroslav; Čapek, Juraj; Sýkorová, Martina; Biňasová, Vladimíra (Žilinská univerzita v Žiline, 2022)
      Štúdium mechanických vlastností strojných súčiastok s malou hustotou vnútornej výplne vyrobených metódou 3D tlače, 2. časť The article is focused on study of mechanical properties of machine components produced by the ...